Will a 2001 Katana Stock Exhaust fit on a 2006 Katana 600

[Chris Becker]

I am trying to put the stock muffler back on my 2006 Katana 600. Right now I have a D & D pipe on it. Will a 2001 Stock pipe fit on the 2006?

[Black_peter]

hmmm my guess is probably... did you look them up on Ron Ayers?
here are some tips on how:

http://www.katriders.com/forums/viewtopic.php?t=26167

[KatanaSoldier]

Yes

[DoyleDee]

I have an 05 and I bought a 03 can from a fellow rider. I had to modify the rear (passenger) bracket (on the can) to make it work....I dunno why, but it is different everything else lined up perfectly.

[Chris Becker]

Exhaust

What did you have to do to modify the rear bracket?

[Dan Dubeau]

I'll tell you that you'd be better off with the older stock can than a newer (04+) one. In 04 they ditched the clearance notch, and just substituted longer peg feelers. If you are into spirited riding, or track riding, you will enjoy the extra ground clearance. I've almost ground through the weld seam on mine. If you don't get over that far, than don't worry aboot it

[StevieB]

than don't worry aboot it

Spoken like a true Canadian...

[DoyleDee]

Re: Exhaust

What did you have to do to modify the rear bracket?

I'll have to take a pic when I get home..basically I used some stainless steel plate 4 pop rivets and drilled a new hole..

[brooder]

I went the other way and put an 05 on my 02. I just took some flat metal and attached it to the rear footpeg bracket and the mounting point on the exhaust.

[DoyleDee]

Ok here's the pics.

[Bigbody45]

wanna sell your d&d