Welcome to the KatRiders.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
|Katana How-To's & FAQ's A forum filled with write-ups, FAQ's, and visual aids for
mechanical & cosmetic modifications to your Katana.
||Thread Tools||Display Modes|
|06-25-2008, 12:31 AM||#1|
Degrees of Difficulty
* Easy,suitable for
novice with little
** Fairly easy, suitable
for beginner with
*** Fairly difficult,
suitable for competent
**** Difficult, suitable for
***** Very Difficult,
suitable for expert DIY
Degree of difficulty - **
(bearing ID X OD X length)
front / rear
1988 600 - red headed step child, no idea what the measurements are, I just choose not to mess with them (I bet Chinto knows)
1989-1997 600/750 - (front) 3" X 17" bearings - 15X42X13 (rear) 3.5" X 17" bearings - 17X47X14
1998-2002 600/750 - (front) 3.5" X 17" bearings - 15X42X13 (rear) 4.5" X 17" bearings - 17X47X14
2003-2006 600/750 - (front) 3.5" X 17" bearings - 17X40X12 (rear) 4.5" X 17" bearings - 17X47X14
So, the 1988 rims are all whacked out they look different, for this I will concentrate on 89-06. On a pre 98 (89-97), the wheels are 3" and 3.5" with swept spokes. The 98-02 front rim is 3.5" with straight spokes, 98-06 rear rims are 4.5" with straight spokes. The 03-06 front rim WILL NOT WORK, in 03 it has a spot that will still drive the speedo drive, but the bearings are different and your forks will not accommodate an axle 17mm in diameter. If you're swapping 98+ rims on a pre 98, there are a few things to consider:
1. The rims look different, if you swap the rear and not the front it won't look right, you need to do both.
2. The pre 98 forks will ONLY accommodate a 15mm axle so only 98-02 front rims will work, rear doesn't matter.
3. Pre 98 have a cable driven speedo which is controlled by the front wheel, 98-02 have this, they work fine.
4. The sprocket hub, when swapping to a post rear rim on a pre, use the pre sprocket hub, don't know what the difference is, this is the only way I've done it.
5. When swapping a post rear rim on a pre you DO NOT need the post swingarm and suspension, just the rim.
6. I CAN NOT stress this enough, when swapping post rims on a pre you ONLY need the rims, that's IT. No axle, no spacers, nothing.
7. On a 98+ the speed is calculated off the sprocket so gearing messes with that. On a pre speed is taken off the front rim, gearing doesn't matter.
One thing to note. The pre rear rotor has a 4 bolt pattern, the post has a 5. You need the rotor that goes with that wheel.
I recommend the front rotors be 98-02, pre front rotors will work, but your going to all this trouble, MAKE IT PRETTY
Last edited by arsenic; 06-27-2008 at 05:22 AM..
|Thread||Thread Starter||Forum||Replies||Last Post|
|Front Wheel Fender - Removal with wheel on?||Bright Wire||Bodyshop||15||02-21-2009 04:52 PM|
|Wheel Help||#1 Moses||Mechanics 101||21||11-29-2008 05:11 PM|
|Wheel Help||Micdalen||Tire Talk, Chain & Sprockets||18||06-08-2008 01:05 AM|
|Will a '01 to '03 wheel fit on an '04 750?||OttawaGeorge||Tire Talk, Chain & Sprockets||2||05-20-2008 03:44 PM|
|kat on one wheel||MossMan4||Pics and Flicks||58||11-15-2004 02:57 PM|