Ok, so I finally got the por 15 treatment done (gas tank had rust) and replaced the petcock (gas leaking from the carbs). Also changed the oil (gas in oil from leaky carbs) and added an in line fuel filter (just to be safe).
Next,
Installed the factory pro stage 1 kit, cleaned and replaced all o-rings on carbs and started her up. It was very difficult to do. With no choke, impossible, with choke barely. Took around the block real quick and by the time I got back and slowed down to pull in she died. Would not start! Push up in driveway. Leave, come back, same scenario. I am also having trouble with idle. Will not stay at 1300 rpm's.
What are my possible solutions to this problem/ problems?
Do the carbs need to be fiddled with some more?
Is there an electrical issue?
Please help as I do not have the money to take it in and have some one else fix it for me and I do not know what is wrong.
Thanks in advance,
Next,
Installed the factory pro stage 1 kit, cleaned and replaced all o-rings on carbs and started her up. It was very difficult to do. With no choke, impossible, with choke barely. Took around the block real quick and by the time I got back and slowed down to pull in she died. Would not start! Push up in driveway. Leave, come back, same scenario. I am also having trouble with idle. Will not stay at 1300 rpm's.
What are my possible solutions to this problem/ problems?
Do the carbs need to be fiddled with some more?
Is there an electrical issue?
Please help as I do not have the money to take it in and have some one else fix it for me and I do not know what is wrong.
Thanks in advance,
Comment