Engine turns over fine, no spark to the plugs
Tested good:
Coils
Spark plugs
Spark plug wires
Ignitor unit(CDI)
Circuit breaker
Signal Generator
Kickstand switch
Fuse box is good along with all the fuses
Ignition switch
Starter solenoid
I have power all the way up to the cdi but no power to the coils. This bike was a rebuild. Took everything off down to the frame and back up replacing LOTS of parts. I even went through the wiring harness and made sure of no open wires or defects. The bike turns over just fine but no spark. Any help is much much much appreciated!
Tested good:
Coils
Spark plugs
Spark plug wires
Ignitor unit(CDI)
Circuit breaker
Signal Generator
Kickstand switch
Fuse box is good along with all the fuses
Ignition switch
Starter solenoid
I have power all the way up to the cdi but no power to the coils. This bike was a rebuild. Took everything off down to the frame and back up replacing LOTS of parts. I even went through the wiring harness and made sure of no open wires or defects. The bike turns over just fine but no spark. Any help is much much much appreciated!
Comment