Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

Carbs won't snap back

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Steve I watched Carbs 102 video and that answered my terminology question. I know what things do Just forget the names sometimes.

    Comment


    • #17
      Got carbs back on. No cables. Idles fine warm revs and returns. Gonna sync carbs. The question is do all 4 at once or 1 and 2 then 3 and 4 the sync 2 and 3. You know since that is where the screws are. Also probably didn't help the throttle handle had grease under it. More unwanted drag. Cleaned it off and it spins freely now.

      Comment


      • #18
        Sync 1 to 2, then do 3 to 4, then the screw between 2 and 3 will sync the two pairs to each other.
        1998 Katana 750
        1992 Katana 1100
        2006 Ninja 250

        2006 Katana 600 RIP - 130k miles

        Comment


        • #19
          Thought so. Thanks

          is this fuel bottle ghetto
          Last edited by Sgt. Dad; 07-28-2016, 05:15 PM. Reason: Automerged Doublepost

          Comment


          • #20
            spent 20 bux made a manometer and did 1 and 2 then 3 and 4 then 2 and 3....runs a bit better now. air box is back on just waiting to get new cables then I will button the rest up.

            Comment


            • #21
              You should sync it with the airbox on in case you didn't
              1998 Katana 750
              1992 Katana 1100
              2006 Ninja 250

              2006 Katana 600 RIP - 130k miles

              Comment


              • #22
                All I did was remove the throttle cables. Hooked everything up as if it was riding down the street, carbs and airbox. Then syncd

                Once I get some new cables I'll hook them up.
                Last edited by Sgt. Dad; 07-29-2016, 09:07 AM. Reason: Automerged Doublepost

                Comment

                Working...
                X