If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
for the BST31SS carb does that take the Mikuni 100/604 main jet? On a few websites they show that that jet is for the RS and the HS carbs but i cannot find any info on the BST.
uuuummmm.... not really sure what your talking about, but on the BST31SS the jets are:
main jets
1 & 4 - 137.5
2 & 3 - 135
Main air jet
1.0mm
Jet needle
4CZ-5-1 (California)
4CZ-4-1
Needle jet
P-8
Pilot jet
37.5 (California)
32.5
Pilot air jet
1988
155 (California)
150
1989
150 (California)
155
Starter jet
45
i know what the size of the stock jets are. My questions is does the BST carb take the main jet model# 100.604? And then you can get that model jet in the various sizes.
i was looking on Dennis Kirk and one other site and they call it a model # 100.604 and then sell it in the various sizes. They also said they were Mikuni so they should be OEM for Mikuni, i'm sure Suzuki has a different part # for them though(and i'm sure a larger price as well)
Comment