I was doing some checks on my bike last night, and found that my chain is very loose under the swing arm, but pretty tight on the top. The bottom moves enough for the chain to touch the swingarm, but the top only moves about an inch. When I pull on the chain at the sprocket, it hardly moves...
Is this normal or to I need to tighten things up a bit?
For reference, it is a 94 600 with 11K miles on it. It had a new chain and sprockets a while ago, but still have a little less than half the adjustment left on the swingarm.
Cheers,
Is this normal or to I need to tighten things up a bit?
For reference, it is a 94 600 with 11K miles on it. It had a new chain and sprockets a while ago, but still have a little less than half the adjustment left on the swingarm.
Cheers,
Comment