The carbs while on prime and not running leak gas out of the back of the carb.. The floats we adjusted 2 times and on the last time we made it so the floats were closed and they still leaked.. Is that the needle valves? and o rings? Is that all that should be replaced? This is on a 2000 600 stock everything too.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
What is needed?
Check my garage for current pic and upgrades
My build thread http://katriders.com/vb/showthread.php?t=127457Tags: None
-
What do you have the floats set at, and why is it left on prime?
Comment
-
Floats were set at 13mm off the lip of the bowl.. I just had it on prime to fill the bowls up after putting them back on the bike. And it will sit their and gas will just come right out of the back of the carb before even trying to start itCheck my garage for current pic and upgrades
My build thread http://katriders.com/vb/showthread.php?t=127457
Comment
-
Originally posted by kat600rdr View PostFloats were set at 13mm off the lip of the bowl.. I just had it on prime to fill the bowls up after putting them back on the bike. And it will sit their and gas will just come right out of the back of the carb before even trying to start it
You adjusted them? Did you check them balanced at an angle so that the floats were just sitting on the needle but NOT compressing the spring loaded pin on the needle? This is the tricky part that is hard for most to get right.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Yeah they were "like holding a cell phone to your ear" Best way to describe it from me..Check my garage for current pic and upgrades
My build thread http://katriders.com/vb/showthread.php?t=127457
Comment
-
Originally posted by phantasm View PostFloat height is 14.6 +/-1
Wrong bike your stating the float height for there....
This is a post kat. 13mm is the right float height.
krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by arsenic View PostTrying to read the bottom of an open can of soda is really the best way I've found to describe it. Sin said that too me once, so all credit goes to him.
That too.. Either one i Guess .. thanks again for the link to the carb rebuild kits.. If for some reason those don't work.. Got any post carbs for sale?Check my garage for current pic and upgrades
My build thread http://katriders.com/vb/showthread.php?t=127457
Comment
-
Originally posted by kat600rdr View PostThat too.. Either one i Guess .. thanks again for the link to the carb rebuild kits.. If for some reason those don't work.. Got any post carbs for sale?
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Check my garage for current pic and upgrades
My build thread http://katriders.com/vb/showthread.php?t=127457
Comment
Comment