Tweet
Degrees of Difficulty
* Easy,suitable for
novice with little
experience
** Fairly easy, suitable
for beginner with
some experience
*** Fairly difficult,
suitable for competent
DIY mechanic
**** Difficult, suitable for
experienced DIY
mechanic
***** Very Difficult,
suitable for expert DIY
or professional
Degree of Difficulty - **
Cross over chart
This is the cross over tables for putting the pre 98 gauges on a 98+ harness. I know a lot of people are not doing this, but this is made so that if someone does decide to do this, you don't have to slave over both diagrams like I did. This diagram is specifically for a Katana 600, weather it is the same on a 750, I do not know, that is your responsibility.
* Easy,suitable for
novice with little
experience
** Fairly easy, suitable
for beginner with
some experience
*** Fairly difficult,
suitable for competent
DIY mechanic
**** Difficult, suitable for
experienced DIY
mechanic
***** Very Difficult,
suitable for expert DIY
or professional
Degree of Difficulty - **
Cross over chart
This is the cross over tables for putting the pre 98 gauges on a 98+ harness. I know a lot of people are not doing this, but this is made so that if someone does decide to do this, you don't have to slave over both diagrams like I did. This diagram is specifically for a Katana 600, weather it is the same on a 750, I do not know, that is your responsibility.