headlight replacement

[Bergy2]

can you replace the headlights w/out removing the plastic

[arsenic]

you can do it without removing them, but you'd have to remove like 90% of the bolts so you can pull the plastics away from around the light. In orther words, it would be a hell of a lot easier to just take them off

[Tmod]

If you mean the bulbs that is easily done.

Tmod

[arsenic]

yeah bulbs are easy, the whole headlight, not so easy.

[Bergy2]

just the bulbs not the assembly

[tobias]

should b really easy. get a flashlight you might be able to see where they turn, and then pop out . i think....

[katman05]

You have to unplug the connector, revove the rubber boot that covers the back of the bulb and then theres a little metal arm that holds the bulb in. I think you have to push in and down on the metal piece that holds in the bulb, if I remember correctly. Just download the manual in the "How to Q & A" section and it should take you through it.

[Sambo1987]

It's really easy, just remove the rubber boots then remove the socket then twist the bulbs out. Standard H4 bulb (9003 depending on where you get it).