starter relay issues

[Jive_Turkey]

Guys I'm at a loss. I f'ed up and installed a new battery backwards. It was a yuasa that I had to add electrolyte to and charge overnight. Fuses are good, and I reset the breaker (pre 98) and rechecked the fuses. I have power to the lights etc, but when I hit the starter my starter relay just clicks once, and when I release the starter button it clicks again.
Now when I first put the battery back on after the backwards incident, and getting it tested at the shop who said to charge it which I did, my starter worked but didn't start the bike, after two attempts the relay started clicking real fast. but now only once.

What now?

[Kat-the-Ripper]

It simply sounds like you are out of battery juice. Leave the battery in it, jump it from a car. If all works you know what the problem is.

Those refillable batteries have a recommended amprage and time to correctly charge them. (I think its like .4 amps for 10 hours AND 1.5 amps for 4 hours)

after that put it in the bike and go for a good long ride.

Hope this helps, cheers!!