using seafoam

[JBLUE]

how much seafoam do I use when I go to the gas station later on today I brought a pint do I use half or the whole can thanks for your input

[kzookat600]

I dumped in the whole can before filling up, it really did seem to work!

[DumbLuck]

trying not to be a wizeguy, but, read the freakin can, gads

[bigdogdeee]

I put a full can in at the beginning of this seasons riding, and it worked great. . .now that the bike seemed to not be idling as well I dumped another half can in, and again it cleared out the idle "jump". I'm just delaying the inevitable however. . .i need to take the carbs apart and clean them. . .

[rexazz2]

careful

that stuff comes in metal can for a reason , over mixing or using will take its toll on plastic and rubber

[Spindrift187]

that stuff comes in metal can for a reason , over mixing or using will take its toll on plastic and rubber

Yea I learned that the hard way when I ran some thru my intake on my 240SX and the already severely worn valve seals said goodbye! I knew better but thought maybe ill do something good for the engine as it was high mileaged. D'oh!

[JBLUE]

trying not to be a wizeguy, but, read the freakin can, gads

thank you for your advice

[cameron]

i used about little less than half a can to a full tank.

[tnvatdreamland]

The print on the can is pretty small. But it reads: 1oz. per gallon. So that would be 5 oz. per tank fill.