is there a how to or a sticky on this?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Umm no, I think because it's bog easy.
Remove locking nuts (under side of levers) using 10mm socket.
Brake: Remove pivot screw using screwdriver..
Lever is off..
Clutch: loosen cable by running adjuster all the way toward lever then line up slits (in adjuster and lever mount)
Remove pivot screw with 10mm socket (or is it 8mm?) remove lever and work cable through slit. Unhook lever..
-
Originally posted by Frenchcropper View PostRemove clutch cut out switch under lever pivot point too (2 small cross head screws), otherwise the lever will not pull out. Presuming Katanas are the same as Inazumas...
Also assuming you have the switch!
Comment
Comment