fan install probs

[*01kat600*]

well i got the fan mounted, and oil lines n such plumbed and it all wired up,, turned the key to test it and grr it comes on when its cold,, still need to get it hot and see if it goes off but ill do that later... so the temp sender is the problem i know,, its a stock part from a idk what year.. gsxr600.... and i thought it would turn the fan on when it got hot but it must be for an oil temp gauge or a pressure switch.. i dont know,, but does anybody know what temp it'd need to come on at to be any benefit? ive come this far and i want to make it work now..

[md86]

I'd just hook it into a toggle switch .

[*01kat600*]

yea, that was my backup plan,, o well.. itll work just not exactly how i wanted but thats allrite

[paperairplane]

Well, anytime the antifreeze gets over 200*F it should come on....

oh wait, I don't have a radiator or antifreeze.

I am not worried about the temps on my katana... the heat isn't going to hurt it as long as you stay under 300* or so....

Just change the oil.