If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I just did the front rim on my 99. I had to use a wire wheel to get the coating off. Then hit it with 320, 400, 600, 1000 and 2000. Finish it off with some Flitz and it looks like a mirror. It only took a couple of hours on the front wheel and I still have to do the rear.
i used steel wool first then used 180 grit paper and now i just use autosol metal polish by hand,got good results on both rims but it did take some time over the winter
I used paint stripper on both front and back then wire brush for the inside spokes that wouldn't come off with a rag. Finished with 400 then 800 sand and mothers to polish. They look great IMHO
All the art of living lies in a fine mingling of letting go and holding on.
Comment