Difficulty on a scale of 1 to 10? Also where is a good place to get one for a 97 600?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
As long as you keep track of how you took all the pices out it is a simple job.
I have seen many kits on ebay.
-
Originally posted by ZukiFredAs long as you keep track of how you took all the pices out it is a simple job.
I have seen many kits on ebay.Good judgement comes from experience, and often experience comes from Bad Judgement :smt084
Help Support Katriders.com via Motorcyclegear.com
Welcome to KatRiders.com! Click here to Register
nah nah nah nah nah nah JAX! (special thnx to sexwax)
Comment
-
It was probably the simplest thing that I've done to the katana. Make sure to get the fuel out of your tank first of course....-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
$22 sounds like a fair price to me.
The only problem I have with mine after I finished is that it works backwards, Res is in the prime poisition and prime is in the res position..
Comment
-
You should be alright. I think like $20 was what I paid for the last one that SpecialK had.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Comment
-
Originally posted by stevesYou should be alright. I think like $20 was what I paid for the last one that SpecialK had.An Ole man once said:"It is better to be thought a fool because of silence, than to open ones mouth and remove all doubt"
Comment
-
So I planned this as a two part event. This evening, I drained and removed the tank. Next, I'll tackle the petcock and I hope I'll have the rebuild kit tomorrow or at the end of the week at the latest.
Ok my question. I assume I'll have to remove the petcock from the tank to do this...or will I. I'm just thinking of the seal (o-ring I think) between the petcock and the tank leaking afterwards.
Comment
-
Comment
Comment