1988 GSX1100F Caliper Identification ?

bccap · 04-04-2012, 06:37 PM

Hi guys
I'm trying to figure out what one of the PO's of my bike has done. I went to replace my pads and discovered that my pads don't match the parts fiche. Mine are single pin in the center, instead of 2 pins. To make matters worse when I pulled the old pads, about a 1/4 inch of the pad is not touching the disk. So if you are inspecting the pad without removing it. The pad appears new. So here are a couple of pics of calipers that are supposed to be for the bike. The ones with Nissin written appear to be what I have. The other is also supposed to be for the bike. Could someone tell me which one the bike is supposed to have?
Thanks

Wild-Bill · 04-04-2012, 08:18 PM

The gold one looks like stock.

bccap · 04-04-2012, 10:49 PM

Thanks Bill. As it turns out they are cheaper as well. I will put my order in.

Wild-Bill · 04-04-2012, 10:51 PM

If you're looking for calipers hold off for a minute. I've got a full set sitting in the garage. Bet I can give you a better price than you can find on flea-bay.

bccap · 04-05-2012, 12:43 AM

I haven't done anything yet ?

Wild-Bill · 04-05-2012, 05:26 AM

PM sent.

04-04-2012, 06:37 PM	#1
bccap Poser Join Date: Jan 2012 Location: Vancouver BC Posts: 87 iTrader: (0) My Garage	1988 GSX1100F Caliper Identification ? Hi guys I'm trying to figure out what one of the PO's of my bike has done. I went to replace my pads and discovered that my pads don't match the parts fiche. Mine are single pin in the center, instead of 2 pins. To make matters worse when I pulled the old pads, about a 1/4 inch of the pad is not touching the disk. So if you are inspecting the pad without removing it. The pad appears new. So here are a couple of pics of calipers that are supposed to be for the bike. The ones with Nissin written appear to be what I have. The other is also supposed to be for the bike. Could someone tell me which one the bike is supposed to have? Thanks __________________ Old Age and Treachery Will Beat Youth and Skill Every Time

04-04-2012, 08:18 PM	#2
Wild-Bill Kat Legend Join Date: Sep 2007 Location: Jacksonville, AR Posts: 9,403 iTrader: (9) My Garage eBay ID: justbillv	The gold one looks like stock. __________________ Wherever you go... There you are! 17 Inch Wheel Conversion HID Projector Retrofit

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1988 GSX1100F for sale	UK-Rockies	1100 Kats ONLY!	0	04-04-2012 05:41 PM
Help GSX1100F 1988 wont run	CanadianBigKat	Mechanics 101	3	12-23-2011 07:14 PM
needle jet identification	adam1803	Mechanics 101	6	07-19-2008 06:35 PM
hindle identification	ontariokatana	Suzuki Katana Talk	6	12-01-2007 05:09 PM
Carburetor Part for 1988 Suzuki GSX1100F Katana	Arion	Mechanics 101	16	09-10-2006 12:13 PM

04-04-2012, 10:49 PM	#3
bccap Poser Join Date: Jan 2012 Location: Vancouver BC Posts: 87 iTrader: (0) My Garage	Thanks Bill. As it turns out they are cheaper as well. I will put my order in.

04-04-2012, 10:51 PM	#4
Wild-Bill Kat Legend Join Date: Sep 2007 Location: Jacksonville, AR Posts: 9,403 iTrader: (9) My Garage eBay ID: justbillv	If you're looking for calipers hold off for a minute. I've got a full set sitting in the garage. Bet I can give you a better price than you can find on flea-bay.

04-05-2012, 12:43 AM	#5
bccap Poser Join Date: Jan 2012 Location: Vancouver BC Posts: 87 iTrader: (0) My Garage	I haven't done anything yet ?

04-05-2012, 05:26 AM	#6
Wild-Bill Kat Legend Join Date: Sep 2007 Location: Jacksonville, AR Posts: 9,403 iTrader: (9) My Garage eBay ID: justbillv	PM sent.