[stretched600]

I put on couple miles on it!

[DaneG320U545]

started putting some rim tape on my wheels. Couldn't finish it last night as it's one of those broken down graphic types with separate pieces. Cleaned her up and took her on a ride to get the juices flowing back into her since my incident a few days ago. Ready to ride her!

[pummuckel]

mines in the

shop for carb work

[garbagekid]

been off the bike since february when i stripped her to fix the carbs.

just ordered a new set (thanks arsenic!) so i will be updating this soon once i get the carbs and some tools i ordered....

[JayBell]

oil change.

this Saturday its front tire, and chain and sprockets time.

[Aaron-71]

Rode her to work and back today. Fantastic ride!

Still need to get the touring windscreen. Starting to hate the wind on my shoulders....

[ErrEs]

Trying to find out why I keep losing the right top fairing bolt (next to tank). Since I put her back together after painting I've lost two bolts already. One stock and one from a kit puchased at bikebolts.

[hardlydangerous]

all balls steering head bearings
braided front brakelines
Pirelli diablo corsa front tire
170/60-17 shonko Apex rear tire
x-ring chain
vortex front sprocket
lightweight steel rear sprocket
new clutch cam and return spring
clutch cable and throttle cable
new adjustable race levers

[blitz2190]

Trying to find out why I keep losing the right top fairing bolt (next to tank). Since I put her back together after painting I've lost two bolts already. One stock and one from a kit puchased at bikebolts.

you have a rubber washer? helped with mine same problem

[hardlydangerous]

make a bushing out of a piece of rubber fuel line.

[Timberwulf]

Clear Alternatives crystal clear front turn signals.
Blue rim stripes.
Tail bag.
JDA Customs brush aluminum billet chain guard (spray painted black to match swingarm).

[ErrEs]

you have a rubber washer? helped with mine same problem

First one was without a washer but broad shouldered (stock). That never was a problem the previous 6.000km. It seems there is more tension on the fairings now. Maybe they layed flat on the ground for too long.
The next one did have a rubber washer.. not anymore now.

[blitz2190]

hm might give thread lock a shot

[ErrEs]

hm might give thread lock a shot

Yeah. I should remember to bring some loctite home from work. At this rate I'll be ordering a new bolt set every month.

[RyanHjelmeland]

I opened up the cluth mechanism and cleaned out that safety switch then realized i could flip it around so now the bike will start only while not pulling on the clutch , awesome , then the two left side spark plugs fouled again , they were good for a few minutes then i ran out of gas , re fueled and then i was only on the cylinders the two on the right side . This is the third time the two plugs on the left and the same 2 carbs are not working . i rolled the bike for nearly 1000km with no problems and now this .