Tweet
when bike is sitting still it idles but at times it will rev up when driving when shifting gears engine stays reved up but when at a stop idle properly
-
-
Originally posted by s61692j View Post
You either have something that is catching the throttle linkage and preventing it sometimes from closing all the way (like the clamps on the boots ) or you have a vacuum leak.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!" -
whats the easiest way to check for vacuum leaksComment
-
Would require you to pull the plastics but carb cleaner or starting spray in small amount around all the rubber and seals be careful around the engine side i recommend while the engine is fairly cold, when the engine idle jumps you found your leaknever argue with an idiot, they'll drag you down to there level and beat you with experience.
confused katana buildOriginally posted by GSXFJimComment
-
checked for vacuum leaks with starting fluid found no leaks checked throttle linkage moving freely checked carb. sync with a manometer all in sync when at a idle if you rev. up also it hesitates before it comes back to a idleComment
-
Originally posted by s61692j View Post
Hanging idle is from being lean. If you don't have vacuum leaks to cause it, then your looking at dirty carbs that need to be cleaned and tuned.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"Comment
-
got another set of carbs off of another bike no more issues just idle bouncy but going to do carb clean and see what happensComment
Comment