Ad Widget

**cintidude04** · 06-19-2012, 02:55 AM

The outer diameter of the 94 header may be larger but the inner diameter is similar. Unless you have an aftermarket header. So do you have a 4-1 or 4-2 header?

**zukilover** · 06-19-2012, 03:02 AM

On my 03 its the one with the 2 middle runners have a pipe connecting them...both are 4_1

**zukilover** · 06-19-2012, 03:02 AM

On my 03 its the one with the 2 middle runners have a pipe connecting them...both are 4_1

**cintidude04** · 06-19-2012, 03:12 AM

You have a pic of the 4-1 from the 94? My bet is on that it is aftermarket.

Originally posted by zukilover View Post

On my 03 its the one with the 2 middle runners have a pipe connecting them...

Not sure what you are trying to say here... but ok.

**95GSX600noob** · 06-19-2012, 06:16 AM

Your would be a 4-1 header, you might be talking about the 94 750 header?

**steves** · 06-19-2012, 06:25 AM

All the pre stock exhaust were 4 into 2's.

If you have a 4-1 it's an aftermarket piece.

If you want to change over to the look of a 4-1 on a pre, you'll need to either swap the oil pan and pick up or dent the collector to get the 4-1 to fit.

**zukilover** · 06-19-2012, 02:42 PM

No but I can take a pic...its got atleast inch and a half pipes...

Originally posted by cintidude04 View Post

You have a pic of the 4-1 from the 94? My bet is on that it is aftermarket.

Not sure what you are trying to say here... but ok.

The 2 middle pipes have a pipe betwen them....it makes the letter h its hooked up and all

**05RedKat600** · 06-19-2012, 02:53 PM

My bet is that's a Post Kat or Katana 1100 exhaust....no aftermarkets to my knowledge had the H pipe in them. That was a Kat factory thing.

**zukilover** · 06-19-2012, 04:50 PM

05 red cat yur right on the money,,,thats on.my 03 punie litttle thing,,,the one on the 94 is huge

Ad Widget

Announcement

94 header on 03 motor

94 header on 03 motor

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment